XXH rubber single tooth synchronous belt design parameters:
The shape of the teeth is British trapezoid teeth, also known as square teeth, which belongs to the super-heavy transmission design.
Standard design reference value: Pitch :31.75mm; Tooth height: 9.35mm; Belt thickness: 15.52mm; Angle: 40 degrees
XXH rubber single-sided synchronous belt Advantages:
1, XXH rubber single-sided tooth synchronous belt using imported high-quality synthetic neoprene rubber as the main raw material, with good scalability, so that the synchronous belt more flexibility, but also to the pulley lateral stability.
2, heat active tensile glass fiber cord performance provides free from correct installation and tension.
3, XXH rubber single-sided tooth synchronous belt is accurate and the top width of the side wall is appropriate to match, and the belt wheel is smoother and more controlled by the belt size.
XXH rubber single tooth synchronous belt Identification:
Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This XXH rubber single-sided tooth synchronous belt model has a 100 inch (2540.00mm) pitch length and a 4 inch (101.60mm) bandwidth.
| specification | Pitch length | Number of teeth |
| 700 XXH | 1778.00 | 56 |
| 800 XXH | 2032.00 | 64 |
| 900 XXH | 2286.00 | 72 |
| 1000 XXH | 2540.00 | 80 |
| 1200 XXH | 3048.00 | 96 |
| 1400 XXH | 3556.00 | 112 |
| 1563 XXH | 3968.75 | 125 |
| 1600 XXH | 4064.00 | 128 |
| 1700 XXH | 4318.00 | 136 |
| 1800 XXH | 4572.00 | 144 |
