S14M rubber single-sided synchronization belt

The S14M rubber single-sided synchronous belt has a curved pitch of 14mm, and the S14M rubber single-sided synchronous belt is mainly used in heavy duty drives. S14M rubber single sided tooth synchronous belt tooth design for transmission better than the traditional 14M rubber single sided tooth synchronous belt transmission curve. In this way, the force is evenly distributed to each belt tooth, which improves the load capacity, reduces the wear of the belt teeth, eliminates noise, and makes the S14M rubber single-sided synchronous belt longer service life.


Production materials: glass fiber, neoprene rubber, nylon high tensile cloth


Processing equipment: steam cylinder mold


Delivery period: 1~3 days


Application fields: textile, machine tool, tobacco, communication cable, light industry, chemical industry, metallurgy, instrumentation, food, mining, petroleum, automobile, etc


  1. Specification and model introduction
  2. Basic rated power meter
S14M rubber single sided tooth synchronous belt design parameters: the tooth shape is semi-circular arc tooth synchronous belt, also known as high torque synchronous belt, S14M rubber single sided tooth synchronous belt drive high torque synchronous belt and high precision synchronous belt. Standard design reference value: Pitch :14mm; Tooth height: 5.30mm; Tape thickness: 10.2mm

s14M arc tooth synchronous belt Features:

1. The special curved tooth shape of the S14M rubber single-sided synchronous belt improves the distribution of force and allows for higher overall load.

2, S14M rubber single-sided tooth synchronous belt without delay. Synchronous belt gear tooth mesh, reduce speed changes. The speed of the continuous push.

3, S14M rubber single-sided tooth synchronous belt has high mechanical efficiency. The belt reduces heat accumulation and does not require a transfer load because of friction.

S14M rubber single-sided synchronous belt Identification:

Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This S14M rubber single-sided synchronous belt model has a pitch length of 2310mm and a bandwidth of 110mm.

 


specificationPitch lengthNumber of teethspecificationPitch lengthNumber of teeth
STS14M-966966.0069STS14M-21002100.00150
STS14M-11201120.0080STS14M-22402240.00160
STS14M-11901190.0085STS14M-23102310.00165
STS14M-12461246.0089STS14M-23802380.00170
STS14M-14001400.00100STS14M-24502450.00175
STS14M-15401540.00110STS14M-25062506.00179
STS14M-16101610.00115STS14M-25902590.00185
STS14M-16521652.00118STS14M-28002800.00200
STS14M-17641764.00126STS14M-31363136.00224
STS14M-18061806.00129STS14M-31503150.00225
STS14M-18901890.00135STS14M-35003500.00250
STS14M-19041904.00136STS14M-38503850.00275
STS14M-19601960.00140STS14M-43264326.00309